CAPACITOR DISCHARGE TOOL • The capacitor discharge tool is designed to safely drain the capacitive charge after the circuit is de-energized • An optional add on resistor to limit discharge current is available • Factory assembled to include the following components: Fiberglass Pole with hand guard, 1/4” Stainless Steel Hook with a 1 3/4” opening, #2 Str. Copper Grounding Cable with safety yellow neoprene jacket, 2 hole Tin Plated Copper Lug is terminated on one end with a heat shrink sleeve • For Custom Build - Contact factory with required clamp, length of fiberglass pole and required length of grounding cable for a part number CAT NO DESCRIPTION LBS CUSTOM BUILD CAPACITOR DISCHARGE TOOL FOR CUSTOM BUILD - CONTACT FACTORY 1004 DISCHARGE TOOL - 2’ FIBERGLASS POLE WITH 6’GROUNDING LEAD (CLAMP NOT INCLUDED) 2.7 6753 ADD ON RESISTOR - RATED AT 10KV, 10 MEGOHM 0.7 P30128 REPLACEMENT RUBBER TOOL HOLDER - SOLD SEPERATELY 0.1 ELECTRO STATIC PRECIPITATOR GROUNDING TOOL • Designed to safely remove the static charge after de-energizing for service work • Grounding tool is factory assembled to include the following components: Brass alloy “U” shaped hook to engage precipitator plates, Fiberglass pole for installation, #2 Str. Copper Grounding Cable with safety yellow neoprene jacket, Ground Clamp • For Custom Build - Contact factory with required clamp, length of fiberglass pole and required length of grounding cable for a part number CAT NO DESCRIPTION LBS CUSTOM BUILD ELECTRO STATIC PRECIPITATOR GROUNDING TOOL FOR CUSTOM BUILD - CONTACT FACTORY 6768 ELECTRO STATIC PRECIPITATOR GROUNDING TOOL 4’ FIBERGLASS POLE, WITH 6’ GROUNDING LEAD, AND C-HEAD GROUND CLAMP MODEL 21575 10.0 GROUNDING AND JUMPER EQUIPMENT Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 12/22 415 P30128 1004 6753 6768
RkJQdWJsaXNoZXIy MTkwMTQ=