INSULATED JUMPER CABLE - 15KV, 25KV, 35KV • 15KV Jumper cable available in four sizes • Conductive strand shield improves service life, dielectric strength and eliminates internal corona • Insulation is mold cured from ethylene propylene rubber (EPR) and resists abrasion, heat, moisture, and ultra violet rays • Flexible at low temperatures • Copper stranding is extra flexible and alloy coated • Note: These cables are not intended for use as permanently installed or portable power cable. To avoid possible cable damage and high leakage currents, these cables must be positioned away from grounded surfaces or energized conductors other than those to which they are connected. CAT NO SIZE AWG STRANDING RATING AMPS WEIGHT PER 1,000 FT 15KV 12198 #2 259 200 440 LBS 12199 1/0 427 250 600 LBS 12200 2/0 427 300 710 LBS 12201 4/0 532 400 1,050 LBS 25KV 6874 2/0 427 300 903 LBS 35KV 6859 1/0 427 250 1,130 LBS JUMPER CABLE FERRULE ASSEMBLES WITH 5/8-11 NC THREADS • Tin plated copper • Ferrule has flat side for use with jumper head CAT NO CABLE SIZE LBS 13100 #2 0.3 13101 1/0 0.3 13102 2/0 0.3 13103 4/0 0.4 GROUNDING AND JUMPER EQUIPMENT Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 07/18 426 12200 13102
RkJQdWJsaXNoZXIy MTkwMTQ=