INSTRUMENTS GROUND / JUMPER ASSEMBLY TESTER • This tester is designed to test in-service grounding and jumpering cable assemblies • Regular periodic use will ensure that jumper assemblies perform as designed for personnel safety • Tester is completely self contained, portable and sets up in seconds. Any standard 120 volt grounded outlet will provide power to the tester. • A reference chart is provided for #2, 1/0, 2/0, and 4/0 Str. Cu. cables of specific lengths to determine correct test values • A built in digital meter allows the operator to easily input the correct voltage specified on the reference chart for various sizes and lengths of cable • A built in digital ammeter tells the operator if the assembly is in good working condition • Test electrodes are available to fit a variety of grounding equipment including elbows, grounding bushings, and ball socket clamps • Maximum voltage output is limited to protect the operator • Pressure sensitive inspection labels are available to tag cables after testing CAT NO DESCRIPTION LBS 7714 GROUND/JUMPER TESTER COMPLETE WITH STANDARD ELECTRODE 36.0 P31347 STANDARD TEST ELECTRODE 1.0 A30367 GROUNDING ELBOW TEST ELECTRODE 0.8 A30368 GROUNDED PARKING STAND TEST ELECTRODE 0.5 P31340 TEST ELECTRODE FOR 1 INCH BALL SOCKET DESIGN GROUND CLAMPASSEMBLY 0.7 A30387 TEST ELECTRODE FOR 20 mm BALL SOCKET DESIGN GROUND CLAMP ASSEMBLY 0.8 A30366 TEST ELECTRODE FOR URD GROUND CLAMPA10015 ASSEMBLY 0.9 P15099 PRESSURE SENSITIVE INSPECTION LABELS - QTY 16 ON PEEL OFF CARD 0.1 Phone: 269.945.9541 • Fax: 269.945.4623 • www.hfgp.com • Email: hastings@hfgp.com PO Box 218, 1301 W Green Street, Hastings, Michigan 49058-0218 These products are for trained professionals only. 07/18 500 7714 P15099 P31347 A30367 A30368 P31340 A30387 A30366
RkJQdWJsaXNoZXIy MTkwMTQ=